|
Traxxion Dynamics R6 Tank Sliders
|
|
1carbontech Twill Carbon Fiber Turn Signal Covers - Seat Sides (L&R); 07-08 GSXR1000
|
List Price: $119.95
Our Price: $119.00
You Save $0.95!
|
|
|
List Price: $495.00
Our Price: $470.25
You Save $24.75!
|
|
|
|
|
Traxxion Dynamics Tanks sliders are designed to reduce the chance of fuel spillage and fire caused by the design of the R6 fuel tank. The R6 tank can impact the ground in a minor crash or lowside, causing the tank to leak fuel, resulting in fire. Many R6s have had minor crashes at the track that have resulted in an entire bike being destroyed by fire. Made from High Impact, Heat Resistant ABS plastic. Easy installation design attached with Auto quality 3M adhesive. A certified tank protector will be required by most race organizations for 2008. Removal not necessary for tank removal. The "after" pictures below are after a 120mph crash at Road Atlanta. Scuffing on tank is from gravel in the runoff area. Tank was not dented by asphalt and there are no scuffs or scratches from the asphalt.
Please note: Traxxion Dynamics is supplying a pair of factory Yamaha logos with our R6 Tank Sliders. This in no way certifies this item as a factory Yamaha part or implies this part is supplied by, endorsed by, or recommended by Yamaha. Traxxion Dynamics has no affiliation with Yamaha Motor Company implied or expressed. WARNING!!! BY REMOVING THIS LABEL AND USING THE TRAXXION DYNAMICS R-6 GAS TANK SLIDER, YOU HEREBY ACKNOWLEDGE THAT THE POSSIBILIY ABSOLUTELY, POSITIVELY EXISTS THAT YOUR BIKE WILL CRASH, BURST INTO FLAMES, BURN TO THE GROUND, SOAK YOU WITH FUEL, LIGHT YOU ON FIRE, AND BURN YOU UNTIL YOU ARE DEAD. YOU ADMIT YOU UNDERSTAND THAT YOUR GAS TANK AND SLIDER WILL BE CRUSHED AND DAMAGED AND BOTH WILL HAVE TO BE REPLACED IF YOU CRASH ON THEM. YOU AGREE TO HOLD TRAXXION DYNAMICS INC, HARMLESS FOR ANY DEATH OR INJURY THAT RESULTS FROM USING THIS PRODUCT.
|
1carbontech is fast making a name as being a top manufacturer of quality carbon fiber parts and accessories. They use high quality twill weave carbon fiber and manufacture under exacting specs with years of experience guiding their processes. You won't find any over-processed machine made parts at 1carbontech; all of their products are hand-made with personal attention and finished with care. These trick pieces are truly what will separate your bike apart from the other "off-the-shelf" bikes and miles away from stock.
These are the pieces found on each side fo your seat that enclose your turn signals. These have to be some of the most trick and unique pieces for your bike. For that racer look and feel or for unique styling cues, you shouldn't have to ride without one. The fit is OEM quality and the finish is first rate for longevity and show quality. You'll also appreciate it for being lighter and stronger than your OEM piece.
Statik Racing is an Authorized 1carbontech Dealer.
**Note: These are custom-made pieces and production times may vary. Please email us for availability PRIOR to ordering.
|
|
|
|
Ohlins Damper; Kyle USA Damper Kits Using Ohlins Dampers - Suzuki GSXR1000 2007-08
|
|
Sato Racing Rearsets, Yamaha R1 2007-08
|
List Price: $349.95
Our Price: $290.00
You Save $59.95!
|
|
|
|
|
|
|
Take away the head shake, smooth out your steering, and make you bike look great. These Ohlins units are only made better with the Kyle USA mount. You will enjoy the quality and history that comes with every Ohlins product along with the high performance that has become the Ohlins name. Kyle USA has made a mounting kit that makes installation too easy and spares nothing on quality or detail.
|
Sato Racing Rearsets
|
|
|
|
Woodcraft 50mm Clip-ons
|
|
1carbontech Twill Carbon Fiber Ram Air Intake Scoops; 07-08 GSXR1000
|
List Price: $149.99
Our Price: $134.99
You Save $15.00!
|
|
|
List Price: $389.99
Our Price: $370.49
You Save $19.50!
|
|
|
|
|
Woodcraft 2 piece split clipons are specially designed to make installation and removal a snap. Our 2 piece design is race proven and makes it easy to service your clipons below the triple clamp without having do dis-assemble the entire front end. Special attention has also been taken to save weight wherever possible.
For these smaller sizes like this Woodcraft includes custom shells that fit securely inside a set of 35mm clipons.
The bars are 12” long and are easily adjusted to whatever custom width you desire.
|
1carbontech is fast making a name as being a top manufacturer of quality carbon fiber parts and accessories. They use high quality twill weave carbon fiber and manufacture under exacting specs with years of experience guiding their processes. You won't find any over-processed machine made parts at 1carbontech; all of their products are hand-made with personal attention and finished with care. These trick pieces are truly what will separate your bike apart from the other "off-the-shelf" bikes and miles away from stock.
These 1carbontech Carbon Fiber Ram Air Intake Covers are the best way to customize your bike. They are high in demand and low in supply making each one highly desirable. For that racer look and feel or for unique styling cues, you shouldn't have to ride without one. The fit is OEM quality and the finish is first rate for longevity and show quality. You'll also appreciate it for being lighter and stronger than your OEM piece.
Statik Racing is an Authorized 1carbontech Dealer.
*Price is for the intake covers only and not the mid fairings and intake; mid-fairings can be purchased separately.
**Note: These are custom-made pieces and production times may vary. Please email us for availability PRIOR to ordering.
|
|
|
