|
|
|
|
|
|
Dynojet Power Commander PCIII USB
|
List Price: $349.95
Our Price: $260.00
You Save $89.95
|
|
|
The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The PCIIIusb allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.
Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Quick Shifter
|
List Price: $284.95
Our Price: $240.00
You Save $44.95
|
|
|
Normally during "up shifting" you must roll off of the throttle and pull in the clutch in order to engage the next higher gear. In racing (both drag and road race), split seconds count. Rolling off the throttle, even slightly, slows your times and can be the difference between winning and losing.
The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch.
The PCIIIUSB incorporates all of the Quick Shifter functionality in with the main fuel controller and is fully programmable. No cutting or splicing of your bike's wiring harness is necessary.
The amount of "kill time" is adjustable by the user via the provided software. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding.
Note: Certain bikes require an ignition module for Quick Shifter functionality.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Wide Band Commander
|
List Price: $529.95
Our Price: $477.00
You Save $52.95
|
|
|
The Wide Band Commander is a tuner’s best friend. It provides a complete picture for proper air-to-fuel ratio analysis. Unlike many “Air/Fuel Systems” on the market that use inferior narrow band technology, this unit has the capability to read from 10.1:1 to 18.1:1 using a Bosch 5 wire LSU4 wideband sensor. This is by far the most complete kit available on the market today.
Once installed, the Wide Band Commander provides an “in-vehicle” dash mount AFR display gauge with a built in warning light, as well as data recording which can be retrieved and analyzed using the supplied software package.
15-7001 Black Face Gauge
15-7002 White Face Gauge
Kit includes the following
Wide Band Commander Module
Power Cable
270 Degree Sweep 2 1/16th Electric Gauge
USB Cable
Bosch 5-Wire LSU4 Wide Band Sensor
Sensor Bung and Plug
Wide Band 02 Sensor Wiring Harness
Gauge Mounting Hardware with Bulb Covers
Multi-Function Cable
Wide Band Commander Software
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Ignition Module
|
List Price: $354.95
Our Price: $300.00
You Save $54.95
|
|
|
The Ignition Module is connected to the PCIII USB with it’s built in expansion port link and communicates via a CAN interface. As in the case of the Power Commander, the Ignition Module uses OEM style connectors to plug in-line of the stock ignition harness so no cutting or splicing is required.
The Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.
The Ignition Module comes standard with no adjustments made in the map for the timing table. Due to different states of tune, fuel quality, and engine modifications we found it is best to leave the ignition timing stock for safety reasons. To have your ignition curve fine tuned Dynojet recommends bringing your bike to one of our Authorized Power Commander Tuning Centers. These centers have the necessary dynamometer equipment to extract the most performance out of the Ignition Module.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Multi-function Hub
|
|
Our Price:
|
|
|
The Multi-Functions Hubs are compatible with all Power Commander III USB units.
The Multi-Function Hub allows user to access advanced expansion features.
Several optional harnesses are available to permit both input and output to/from the module.
Your options are:
HUB-001 Hub Only
HUB-002 Hub w/ Map Switch and Handle Bar Bracket
HUB-003 Hub w/ Map Switch, Handle Bar Bracket and Gear Position/Speed pressure input and Relay Harnesses
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Power Commander LCD Unit - Digital Dash
|
List Price: $299.95
Our Price: $250.00
You Save $49.95
|
|
|
The LCD Display connects to any Power Commander USB via a “quick disconnect” cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.
Multiple maps can be stored in the unit (requires optional SD memory card, not included). These maps can be sent to the Power Commander “on the fly.” Additionally, maps can be adjusted using the controls on the display.
The LCD Display has the ability to log the data being displayed later analysis (requires optional SD memory card, not included).
|
|
|
|
|
|
|
|
|
|
|
|
|
Graves Motorsports Marker Lights Yamaha R1 2004-09 / R6 2003-09 / R6S 2006-08 / FZ1 2006-08
|
List Price: $129.99
Our Price: $116.00
You Save $13.99
|
|
|
Graves Motorsports Marker Lights
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Power Commander PCIII USB - Yamaha FZ1 06
|
List Price: $339.95
Our Price: $260.00
Sale Price: $252.95
You Save $87.00
|
|
|
The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The PCIIIusb allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.
Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dynojet Multi-function HUB-002 Hub w/ Map Switch and Handle Bar Bracket
|
List Price: $159.95
Our Price: $144.00
Sale Price: $137.95
You Save $22.00
|
|
|
HUB-002 Hub w/ Map Switch and Handle Bar Bracket is on clearance!
The Multi-Functions Hubs are compatible with all Power Commander III USB units.
The Multi-Function Hub allows user to access advanced expansion features.
Several optional harnesses are available to permit both input and output to/from the module.
|
|
|
|
|
|
|
