|
|
|
|
|
|
Woodcraft Honda CBR1000RR Rear Sets Complete w/Pedals
|
List Price: $379.99
Our Price: $341.99
You Save $38.00
|
|
|
"The complete rearset kit consists of the rearset plates, footpegs, 3 piece pedals and all of the needed hardware to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. These kits allow you to eliminate the entire kickstand boss assembly as the shift pedal is converted to a conventional peg mounted unit. This provides for more positive shifting feel and the ability to easily choose either standard or GP shift. In the event that you need replacement parts, any individual piece of this kit is available.
Note: SOLD AS A COMPLETE SET ONLY!"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600 F2/F3 Rearsets
|
List Price: $219.99
Our Price: $197.99
You Save $22.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pedals up and back 1 inch
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600 F4/F4i Rearsets
|
List Price: $219.99
Our Price: $197.99
You Save $22.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up 1.25" and back 1"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600 F4 Rearsets w/ pedals
|
List Price: $349.99
Our Price: $314.99
You Save $35.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up 1.25" and back 1"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600 F4i Rearsets w/ pedals
|
List Price: $349.99
Our Price: $314.99
You Save $35.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.
Moves pegs up 1.25" and back 1"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600RR Rear Sets w/Shifter
|
List Price: $319.99
Our Price: $287.99
You Save $32.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet shift pedal and all of the needed hardware to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. These kits allow you to eliminate the entire kickstand boss assembly as the shift pedal is converted to a conventional peg mounted unit. This provides for more positive shifting feel and the ability to easily choose either standard or GP shift. In the event that you need replacement parts, any individual piece of this kit is available.
This kit uses the OEM brake pedal.
Moves pegs up 1" and back 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda CBR600RR Rear Sets complete
|
List Price: $379.99
Our Price: $341.99
You Save $38.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece pedals and all of the needed hardware to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. These kits allow you to eliminate the entire kickstand boss assembly as the shift pedal is converted to a conventional peg mounted unit. This provides for more positive shifting feel and the ability to easily choose either standard or GP shift. In the event that you need replacement parts, any individual piece of this kit is available.
Moves pegs up 1" and back 1/2"
Moves pegs up 1" and back 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda 2007 CBR600RR Rearset Kit
|
List Price: $334.99
Our Price: $301.49
You Save $33.50
|
|
|
These 2 position adjustable rearsets are made from aircraft qualilty billet Aluminum and feature a custom shift pedal that allows for either standard or GP shifting. They move the footpegs 3/4" back and offer either 1/2"up or 1" up peg positions. The CFM pedal allows riders to not only eliminate the heavy kisckstand mount bracket for racing, but also to utilize a shifter that moves in the same arc as your foot, making shifting much more comfortable.
These kits have been race proven and held up beautifully when a couple of our "test" riders put them to the test on the tarmac.
This kit assumes that you have the OEM rearsets, as it reuses some of the mounting hardware. They are upgradeable at any time to utilize the CFM billet brake pedal.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda 2007 CBR600RR Full Rearset Kit
|
List Price: $399.99
Our Price: $359.99
You Save $40.00
|
|
|
These 2 position adjustable rearsets are made from aircraft qualilty billet Aluminum and feature a custom shift pedal that allows for either standard or GP shifting. They move the footpegs 3/4" back and offer either 1/2"up or 1" up peg positions. The CFM pedal allows riders to not only eliminate the heavy kisckstand mount bracket for racing, but also to utilize a shifter that moves in the same arc as your foot, making shifting much more comfortable.
These kits have been race proven and held up beautifully when a couple of our "test" riders put them to the test on the tarmac.
This kit assumes that you have the OEM rearsets, as it reuses some of the mounting hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Honda RC51 Rearsets
|
List Price: $219.99
Our Price: $197.99
You Save $22.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up 1" and back 1/2"
|
|
|
|
|
|
|
