|
|
|
|
|
|
Woodcraft Suzuki GSXR750 '00+,600/1000 '01+ Rearsets w/ pedals
|
List Price: $329.99
Our Price: $296.99
You Save $33.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.
Moves pegs up and back 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR1000 2005-06 Rearsets
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves footpegs up & back 1/2 inch.
Similar rearsets shown in picture
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR600 01-05, 750 00-05 ,1000 01-04 R'sets
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up and back 1/2"
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR600 97-00/ GSXR750 96-99/ 99-02 SV650 Rearsets
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up and back 3/4" on the GSXR
Moves pegs up and back 1.5" on the SV650
Moves pegs up and back 3/4" on the SV650S
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR 1000 2005-06 Complete Rearset Kit
|
List Price: $329.99
Our Price: $296.99
You Save $33.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.
Peg Movement: Up & Back 1/2"
Similar rearset kit shown in photo
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR600 97-00/ GSXR750 96-99/ 99-02 SV650 Rearsets w/ pedals
|
List Price: $329.99
Our Price: $296.99
You Save $33.00
|
|
|
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.
Moves pegs up and back 3/4" on the GSXR
Moves pegs up and back 1.5" on the SV650
Moves pegs up and back 3/4" on the SV650S
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki 2007 GSXR1000 Rearsets 2007+
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals.
They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. This kit is upgradeable at any time to accept the 3 piece billet shift and brake pedals.
This kit utilizes the OEM 3 position mouting plate, and allows for 6 position adjustment using the "high" or "low" mounting locations.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki GSXR600/750 W/Shift Pedal 2006-07
|
List Price: $269.99
Our Price: $242.99
You Save $27.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly, plus a complete shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike, and utilizes the OEM brake pedal. They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish.
They retain the 3 position adjustability of the stock rearsets but get your pegs off the ground and allow for GP shift in all 3 positions - not just one like the stock sets.
They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. This kit is upgradeable at any time to accept the 3 piece billet brake pedal.
Moves pegs up 5/8" and back 3/8" - Photos coming soon.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki SV1000 2003 Rear Sets
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. The 2003 SV may use either CFM or stock pedals, the 004-05 SV requires the use of the 3 piece CFM pedals.
They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up and back 1.25" on the SV
Moves pegs up and back .75" on the SVS
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodcraft Suzuki SV650 2003-05 Rear Sets
|
List Price: $199.99
Our Price: $179.99
You Save $20.00
|
|
|
Suzuki SV650 03-05 Rear Sets (05-0224)
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. The 04-06 SV requires the use of the 3 piece billet shift pedal, which must be pruchased in addition to this base kit. The 2003 may use either CFM or OEM pedals.
They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Moves pegs up and back 1.25" on the SV650
Moves pegs up and back .75" on the SV650S
Moves pegs up and back .75" on the SVS
|
|
|
|
|
|
|
